Fagor 8035-T - Page 443

 Installation manual
CNC 8035
APPENDIX
Summary of PLC inputs and outputs
E.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·443·
KEY INHIBITING LOGIC INPUTS.
LOGIC INPUTS OF THE PLC CHANNEL
GENERAL LOGIC OUTPUTS.
KEYDIS1 R500 Inhibit the operation of the panel keys.
KEYDIS2 R501
KEYDIS3 R502
KEYDIS4 R503
/FEEDHOP M5004 Stops the PLC axes momentarily, maintaining spindle rotation.
/XFERINP M5005 Prevents the next block from being executed in the PLC channel, but finishes the one
being executed.
AUXENDP M5006 Indicates that the execution of the M, S and T functions has completed.
BLOABORP M5061 Possibility to abort the PLC channel
CNCREADY M5500 CNC without errors.
START M5501 The CYCLE START key of the front panel has been pressed.
FHOUT M5502 Indicates that program execution has been interrupted.
RESETOUT M5503 Indicates that the CNC is set to initial conditions.
LOPEN M5506 Indicates that the positioning loop for the axes is open.
/ALARM M5507 An alarm or emergency condition was detected.
JOG M5508 The manual operation (JOG) mode has been selected.
AUTOMAT M5509 The automatic operation mode has been selected.
MDI M5510 The MDI mode has been selected.
SBOUT M5511 The single block execution mode has been selected.
INCYCLE M5515 The part program is being executed.
RAPID M5516 A rapid traverse is being executed (G00).
TAPPING M5517 A tapping cycle is being executed (G84).
THREAD M5518 A threading block is being executed (G33).
PROBE M5519 A probing movement is being executed (G75/G76).
ZERO M5520 A machine reference search is being executed (G74).
RIGID M5521 A rigid tapping block in execution. Milling model.
RETRAEND M5522 Retrace function. All possible blocks have been retraced.
CSS M5523 The G96 function is selected.
SELECT0 M5524 Position selected at the front panel switch.
SELECT1 M5525 Position selected at the front panel switch.
SELECT2 M5526 Position selected at the front panel switch.
SELECT3 M5527 Position selected at the front panel switch.
SELECT4 M5528 Position selected at the front panel switch.
SELECT5 M5529 Position selected at the front panel switch.
SELECT6 M5530 Position selected at the front panel switch.
SELECT7 M5531 Position selected at the front panel switch.
SELECTOR R564 Position selected at the front panel switch.