F&P SleepStyle Product Technical Guide | 4
BEFORE YOU START
This Technical Guide is intended for the healthcare provider and technical personnel only. It includes specifications, spare parts, device checks
and troubleshooting for the F&P SleepStyle Auto and CPAP devices.
1. INTRODUCTION
The F&P SleepStyle Auto is an auto-adjusting positive airway pressure device. The F&P SleepStyle CPAP is a continuous positive airway pressure
device (CPAP).
This guide refers to the F&P SleepStyle Auto and F&P SleepStyle CPAP as the “device”.
The device treats Obstructive Sleep Apnea (OSA) by delivering a flow of positive airway pressure at a level prescribed by the physician, to splint
open the airway and prevent airway collapse.
The healthcare provider is responsible for ensuring that:
• All components used with the device are compatible
• The device is correctly configured with the patient’s therapeutic settings
• The eectiveness of the patient’s therapy is periodically reassessed
Refer to the Use and Care Guide in Appendix C and the Clinician Guide in Appendix D for additional information regarding the setup and use of
the device.
1.1 APPLICABLE MODELS
This Technical Guide is applicable to the following F&P SleepStyle devices:
SleepStyle Auto SleepStyle CPAP
SPSAAA SPSCAA
SPSABA SPSCBA
SPSAAB SPSCAB
SPSABB SPSCBB
SPSABC SPSCBC
SPSAFC SPSCFC
SPSAAE SPSCAE
SPSABE SPSCBE
SPSAAJ -
SPSABJ SPSCBJ
SPSAAK SPSCAK
SPSABK SPSCBK
SPSAAN SPSCAN
SPSABN SPSCBN
SPSAAS SPSCAS
SPSABS SPSCBS
SPSAAU -
SPSABU -
SPSAAW SPSCAW
SPSABW SPSCBW
Note: Not all models are available in all countries.
1.2 WARNINGS/CAUTIONS
For a comprehensive list of warnings and cautions, please refer to the Use and Care Guide in Appendix C.
WARNING
To avoid incorrect therapy:
Do not use the device with other medical devices not recommended by Fisher & Paykel Healthcare e.g. breathing system filters or breathing
tubes.
Refer to TRS-353 for the Verification of Understanding (FPH Internal Use Only)
To Next Page
Loading...
