F&P SleepStyle Auto - 5 Comfort Options; Humidity; Expiratory Relief

F&P SleepStyle Product Technical Guide | 53
A-1 1
5. COMFORT OPTIONS
5.1 Humidity
The humidity level can be set to 0 (O) or between
1 and 7 (On). The default humidity setting is 5.
1. Press Down
or Up to scroll to the
“Humidity” setting.
2. Press OK
to select “Humidity”.
3. Press Down or Up to change the level
of humidity.
4. Press OK
to accept the change.
If a ThermoSmart breathing tube is connected to
the device, the ThermoSmart icon
will appear
on the Patient Menu home screen.
5.2 Expiratory Relief
In this menu, expiratory relief can be Activated or
Deactivated.
If Activated, the expiratory relief level can be set to
O (3 transparent circles), Low (1), Medium (2), or
High (3). The default setting is Activated and the
default expiratory relief level is Low (1).
You can also select whether the patient is able to
adjust expiratory relief.
1. Press Down
or Up to scroll to the
“Expiratory relief” setting.
2. Press OK
to select “Expiratory relief”.
3. You will be asked if you would like to “Activate
Expiratory relief.” Press Down
or Up to
change the setting.
4. Press OK
to accept the change.
If you have activated expiratory relief:
5. Press Down
or Up to change the
expiratory relief level.
6. Press OK
to confirm and exit to the main
Clinician Menu.
You will be asked if you would like to “Allow patient
to adjust?”. This allows you to set whether the
patient can turn expiratory relief On or O and
adjust the expiratory relief level:
7. Press Down
or Up to change the
setting.
Yes
will allow the patient to turn
expiratory relief On or O and adjust the
expiratory relief level. No
will remove
expiratory relief from the Patient Menu.
Expiratory relief will still run in the background
as set up by the clinician.
8. Press OK
to accept the change and exit to
the main Clinician Menu.
ENGLISH
Clinician Guide – Page 11