F&P SleepStyle Auto - Time; Language

F&P SleepStyle Product Technical Guide | 56
A-1 4
7. SERVICE OPTIONS
7.1 Information
The Information screen shows the software version
the device is running and the total number of
runtime hours of the device.
1. Press Down
or Up to scroll to
“Information”.
2. Press OK
to select.
3. Once you are ready to exit, press OK or
Menu
to exit to the main Clinician Menu.
7.2 Fault Log
This is a list of fault codes and the dates on which
they occurred since the last factory reset.
1. Press Down
or Up to scroll to “Fault
log”.
2. Press OK
to select.
3. Press Down or Up to scroll through the
list of recorded faults.
4. Once you are ready to exit, press OK
or
Menu
to exit to the main Clinician Menu.
6.3 Time
To ensure accurate therapy data reporting, the
time on the device’s internal clock needs to be set.
The time must be set in 24 hour format.
To set the device time:
1. Press Down
or Up to scroll to “Time”
and press OK
to select.
2. Press Down or Up to select the correct
Hour and press OK
. Press and hold Down
or Up to fast-scroll.
3. Press Down or Up to select the correct
Minutes and press OK
. Press and hold
Down
or Up to fast-scroll.
6.4 Language
The language screen allows you to select the
language that appears on the device for the
Patient and Clinician Menus.
1. Press Down
or Up to scroll to
“Language”.
2. Press OK
to select.
3. Press Down or Up to select the
language.
4. Press OK
to accept the change and exit to
the main Clinician Menu.
ENGLISH
Clinician Guide – Page 14