A-1 3
6. DEVICE OPTIONS
6.1 Display pressure
Display pressure allows you to show or hide the
pressure level during therapy. The default setting
is pressure hidden during therapy. This option also
allows you to set the pressure units of the device in
cmH
2
O or hPa.
1. Press Down
or Up to scroll to the
“Display pressure” setting.
2. Press OK
to select “Display pressure”.
3. Press Down or Up to change the
setting. If you select No
, the patient
will not see their pressure during therapy. If
you select
Yes
, the patient will see their
pressure during therapy.
4. Press OK
to accept the change. You will
now see the pressure unit selection screen.
5. Press Down or Up to change the
setting. The units you select will be displayed
during therapy (if this has been enabled in the
previous screen) and when selecting therapy
pressure.
6. Press OK
to confirm your selection.
6.2 Display (Patient) AHI
Display AHI allows you to show or hide AHI when
a patient views their therapy data. The default
setting is AHI shown in the Patient Menu.
1. Press Down
or Up to scroll to the
“Display AHI” setting.
2. Press OK
to select “Display AHI”.
3. Press Down or Up to change the
setting.
If you select No
, the patient will not
see their AHI when viewing “My Data” in the
Patient Menu or in any of the data screens
displayed when they stop therapy. If you select
Yes
, the patient will see their AHI when
viewing ‘My Data and in the data screens
displayed when they stop therapy.
4. Press OK
to accept the change and exit to
the main Clinician Menu.
ENGLISH
To Next Page
