A-22
8.6.4 Bluetooth® Technology (On/
O)
This option allows the patient to turn Bluetooth
wireless technology On or O.
To turn Bluetooth On or O, ask the patient to:
1. Press Menu
until they reach the
“Bluetooth” setting.
2. Press Down or Up to change the
selection. The selected option will flash once to
indicate the selection has been saved.
3. Press Menu
to scroll to the next screen in
the hidden menu. To exit the hidden menu,
continue pressing Menu
until the home
screen is reached.
8.6.5 Clear all paired devices
If the Bluetooth pairing fails, then clearing all
paired devices will allow the patient to restart
the pairing process. The patient may also wish
to do this should they choose to forget the F&P
SleepStyle device from their mobile device.
Clearing all paired devices should only be done as
a last resort.
This feature is also useful if you, or the patient,
would like to replace the mobile device that the
device is currently paired to. The device can pair
with multiple mobile devices; however, only one
mobile device with the app can see the patient’s
therapy data.
Note: This option is only available if Bluetooth is
On.
To clear all paired devices, ask the patient to:
1. Press Menu
until they reach the “Clear all
paired devices?” screen.
2. Press Down or Up to change the
selection to Yes
.
3. Press OK
to clear all paired devices. Wait
for the following screen to appear:
4. Press OK or Menu to acknowledge and
clear the message.
5. Press Menu
to return to the Patient Menu
home screen.
8.7 Stand-by Mode
The device will enter stand-by mode after 30
seconds if no button has been pressed on the
device.
The display screen light will dim but will still be
visible to show that the device is still powered on.
Press Down
, Up , OK , or Menu to
wake up the device.
ENGLISH
To Next Page
