F&P SleepStyle Auto - Error Messages on Sleepstyle Screen

F&P SleepStyle Product Technical Guide | 78
Clinician Guide – Page 36
A-36
13.2 Error Messages on SleepStyle Screen
If a fault is detected with the device or its accessories, a screen will appear with a notification and an error
code. Identify the error code in the ranges specified below and follow the appropriate corrective action. If
the error continues or reoccurs, record the number displayed and contact your Fisher & Paykel Healthcare
representative for further instructions.
Error codes
between
Solution
100–199 The device may not be able to provide eective therapy. The device may have shut down
or may not be able to provide the prescribed pressure.
Solution: Turn the power o and on at the power supply to restart the device.
400–499 Humidity may have been disabled. The device is still safe to use without humidity. The
patient will still be treated at the prescribed pressure.
Solution: Turn the power o and on at the power supply to restart the device.
510 or 512 There may be a problem with the ThermoSmart breathing tube. The device is still safe to
use. The patient will still be treated and get humidity, but it may not be optimal.
Solution: Try reconnecting your ThermoSmart breathing tube. When connected
correctly, the ThermoSmart icon
will appear on the home screen. Alternatively, turn
the power o and on at the power supply to restart the device. If the error continues or
reoccurs, replace the ThermoSmart breathing tube. See section 12 - Replacement Parts.
500–599
(excluding 510
or 512)
The ThermoSmart breathing tube may have been disabled. The device is still safe to use.
The patient will still be treated and get humidity, but it may not be optimal.
Solution: Turn the power o and on at the power supply to restart the device. If the error
continues or reoccurs, See section 12 - Replacement Parts.
ENGLISH