A-1 8
5. Unfold the chamber seal and push down in the
finger holds to secure it in place.
Cautions
To prevent water damage to the device:
Do not use the device without the chamber seal
fitted to the water chamber.
6. Place the water chamber back into the device
and close the device lid.
8.2 Starting Therapy
1. Ask the patient to fit their mask.
2. Press Start/Stop
to start therapy.
The screen below will appear:
8.3 Stopping Therapy
1. Get the patient to remove their mask.
2. Press Start/Stop
to stop therapy.
The device screen below will appear:
3. The screen will then scroll through the patient’s
therapy data from the session that has just
finished (if the session has lasted 6 minutes or
longer).
Therapy Hours: Number of hours the patient
used their device.
Mask Leak: If the patient’s mask leak was
“Normal” or “High”.
AHI: Average number of apneas or hypopneas
the patient had per hour.
Note: If you would like to bypass this automated
scrolling, press Menu
to scroll through the data
screens manually.
ENGLISH
To Next Page
