Fargo DTC1250e User Manual

DTC1000Me-1250e-4250e-4500e Card Printer Service Manual PLT-01543 rev 1.0
November 2013 89
.
Step
Procedure
4
Remove all the wire connections.
Tilt the mainboard up to access the wires.
Wires are labeled with the numbered location for easy replacement.
(Refer to Appendix B for wire/board locations)
5
Replace with the new mainboard using reverse assembly.
NOTE: Use caution not to damage the power connector.

Fargo DTC1250e Specifications

General

Print Technology	Dye-Sublimation / Resin Thermal Transfer
Print Resolution	300 dpi
Card Capacity	Input Hopper: 100 cards; Output Hopper: 30 cards
Card Sizes	CR-80, CR-79 Adhesive Back
Connectivity	USB 2.0
Memory	32 MB RAM
Card Thickness	9 mil to 40 mil
Operating System Support	Windows 7, 8, 10