EasyManuals Logo

Fargo DTC4500 User Manual

Fargo DTC4500
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
© 2010 HID Global Corporation All rights reserved
DTC4500 Card Printer/Encoder User Guide L001444 Rev1.0
6
Agency Listings
Term Description
Emissions
Standards
CE, FCCPart 15 Class A, CRC c1374, CISPR22 Class A,
EN55022, EN55024,
EN61000-3-2, EN61000-3-3,
Safety Standards UL IEC 60950-1 (2001), CSA C22.2 No. 60950-1-03.
United States
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference; in which case, you will be required
to correct the interference at his own expense.
Reference the Safety Messages in this document.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
C’et appareil numerique de la classe A est comforme a la norme NMB-003 du Canada.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Table of Contents

Other manuals for Fargo DTC4500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fargo DTC4500 and is the answer not in the manual?

Fargo DTC4500 Specifications

General IconGeneral
Print TechnologyDye-sublimation / Resin thermal transfer
Resolution300 dpi
Card SizesCR-80, CR-79 adhesive back
Memory32 MB RAM
Power Requirements100-240 VAC, 50-60 Hz
Card Capacity200 cards input hopper, 100 cards output hopper
ConnectivityUSB 2.0, Ethernet
Operating SystemsWindows 7, 8, 10, Server 2008, 2012, 2016
Weight9.5 kg (20.9 lbs)
Dimensions9.8" H x 9.2" D / 249 mm H x 234 mm D
Operating Temperature15°C to 35°C (59°F to 95°F)
Operating Humidity20% to 80% (non-condensing)
Card Thickness0.009" - 0.040" / 0.229 mm - 1.016 mm

Related product manuals