©FARO Technologies, Inc., 2002-2007. All rights reserved.
No part of this publication may be reproduced, or transmitted in any form or by
any means without written permission of FARO Technologies Inc.
FARO TECHNOLOGIES INC. MAKES NO WARRANTY, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE FARO ARM AND ITS
MATERIALS, AND MAKES SUCH MATERIALS AVAILABLE SOLELY ON
AN “AS-IS” BASIS.
IN NO EVENT SHALL FARO TECHNOLOGIES INC. BE LIABLE TO
ANYONE FOR SPECIAL, COLLATERAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING
OUT OF THE PURCHASE OR USE OF THE FARO ARM OR ITS
MATERIALS. THE SOLE AND EXCLUSIVE LIABILITY TO FARO
TECHNOLOGIES INC., REGARDLESS OF THE FORM OF ACTION,
SHALL NOT EXCEED THE PURCHASE PRICE OF THE MATERIALS
DESCRIBED HEREIN.
The information contained in this manual is subject to change without notice and
does not represent a commitment on the part of FARO Technologies Inc.
FaroArm
®
and CAM2
®
are registered trademarks of FARO Technologies Inc.
Acrobat
®
is a registered trademark of Adobe Systems Inc.
FARO Technologies, Inc. Internal Control File Locations:
F:\CONTROL\REFERENC\08PRODUC\ENGLISH\Prdpub46\08m46e00 - FaroArm - January 2007. pdf
F:\CONTROL\RECORDS\05MANUFA\PARTSPEC\XH17-0258.pdf
08M46E00_FaroArmUSB.book Page 3 Monday, January 15, 2007 1:12 PM
To Next Page
Loading...
Need help?
General
