Feig Electronic TST FUF2 Series User Manual

TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 110 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
Drive output (X13)
Voltage may also be present at the motor terminals at standstill or when the emergency
stop is activated. Warning label on the drive Note!
FUF2
-A
-C
-F
1~ 230V
Max. rated motor
current
0.75 kW
1.5 kW
2.2 kW
Max. rated motor current
100% ED
1
(40°C)
5 A
8 A
10 A
60% ED
2
(40°C)
5 A
8 A
10 A
40% ED
3
(50°C)
5 A
8 A
10 A
40% ED
3
(40°C)
5 A
10 A
12 A
15 % ED
4
(40 °C)
5 A
10 A
12 A
1~ 110V
Max. rated motor
current
0.25 kW
0.50 kW
0.75 kW
Max. rated motor
current
100% ED
1
(40°C)
3.5 A
6 A
7 A
60% ED
2
(50°C)
3.5 A
6 A
7 A
40% ED
3
(50°C)
3.5 A
6 A
7 A
Max. length of motor
cable
30 m
Frequency
6 – 200 Hz
Overload for 0.5 s
> 2-times rated motor current
(depending on input voltage)
Observe duty cycle and temperature range:
1
Continuous travel with rated current for max. 60 minutes
2
for example 6 seconds drive and 4 seconds break
3
for example 8 seconds drive and 12 seconds break
4
for steel or stainless steel housings: 30 minutes for continuous operation at 40 °C
FU3F
-A
-C
-F
3~ 400V
Max. rated motor
current
2.2 kW
4.0 kW
5.0 kW
Max. rated motor
current
100% ED
1
(40°C)
5 A
10 A
12 A
60% ED
2
(40°C)
5 A
10 A
12 A
40% ED
3
(50°C)
5 A
10 A
12 A
10% ED
4
(40 °C)
5 A
10 A
12 A
Max. length of motor
cable
20 m
30 m
Frequency
6 – 200 Hz
Overload for 0.5 s
> 2-times rated motor current (depending on input voltage)
Observe duty cycle and temperature range:
1
Continuous travel with rated current for max. 20 minutes
2
for example 6 seconds drive and 4 seconds break
3
for example 8 seconds drive and 12 seconds break
4
for steel or stainless steel housings: 15 minutes for continuous operation at 40 °C

Feig Electronic TST FUF2 Series Specifications

General

Brand	Feig Electronic
Model	TST FUF2 Series
Category	Controller
Language	English