Feig Electronic TST FUF2 Series User Manual

TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 66 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
6.7 Interface card TST RFUxFCOM
Optionally, the interface card TST RFUxFCOM provides an RS-485 and a CAN interface.
This allows connections to partner controller or to an external TST RFUxK board, for example.
Figure 40: Interface card TST RFUxFCOM
The interface card does not have to be activated by means of parameters.
In order to reach the connectors 71-76 and B1 – B2 easier, the green and yellow plug of
the interface card TST RFUxFCOM should be removed first.

Feig Electronic TST FUF2 Series Specifications

General

Brand	Feig Electronic
Model	TST FUF2 Series
Category	Controller
Language	English