Feig Electronic TST FUZ2-CX User Manual

FUZ2 -A/-B/-C/-CX/-G/-L
Assembly instructions
TST
FEIG ELECTRONIC GmbH
Page 54 of 96
TST_FUZ2-A-B-C-CX-G-L_Montageanleitung_EN_22.docx
7.2 Induction loop detector TST SUVEK
The Induction loop monitor is available in the variants TST SUVEK-1 and TST SUVEK-2.
Depending on the type, 1 or 2 loops may be monitored.
Figure 35: Detector card
To activate the slot for the detector, parameter P.802 must be set to 0302.
It is not possible to operate detector boards in controller variants -A.
Schleife 2
Schleife 1

Feig Electronic TST FUZ2-CX Specifications

General

Brand	Feig Electronic
Model	TST FUZ2-CX
Category	Controller
Language	English