Feig Electronic TST FUZ2-CX User Manual

FUZ2 -A/-B/-C/-CX/-G/-L
Assembly instructions
TST
FEIG ELECTRONIC GmbH
Page 56 of 96
TST_FUZ2-A-B-C-CX-G-L_Montageanleitung_EN_22.docx
7.4 Safety edge monitor TST SURA
The safety edge monitor is available in the variants TST SURA-1 and TST SURA-6.
Depending on the type, 1 or 6 safety edge may be monitored.
Figure 37: Safety edge monitor
To activate the slot for the safety edge monitor, parameter P.802 must be set to 0101 for TST
SURA-1 or 0106 for TST SURA-6.
It is not possible to operate safety edge monitors in controller variants -A.
8K2
8K2
8K2
8K2
8K2
8K2
8K2

Feig Electronic TST FUZ2-CX Specifications

General

Brand	Feig Electronic
Model	TST FUZ2-CX
Category	Controller
Language	English