Feig Electronic TST FUZ2-CX User Manual

FUZ2 -A/-B/-C/-CX/-G/-L
Assembly instructions
TST
FEIG ELECTRONIC GmbH
Page 60 of 96
TST_FUZ2-A-B-C-CX-G-L_Montageanleitung_EN_22.docx
7.8 Expansion board TST RFUxIO-B/-E
The expansion boards RFUxIO-A/-B/-E provide an extension to the input / output. They brings the following
applications:
TST RFUxIO-B: for connection to superordinate electronic units such as host computer or Programmable
Logic Controller (PLC).
TST RFUxIO-E: for the output of power signals (e.g. for oncoming traffic sample control).
The expansion board RFUxIO-B/-E has 6 additional inputs and up to 6 relay outputs (TST RFUxIO-E), which
are freely programmable in their function.
The expansion board is fitted on spacers and are connected with the door controller (X20a) via the plug
connector X30a.
Attach the clamps in an upright position only!
360 361 362 363
X30a
X30b
X20a
320 321 322 323 324 325
Figure 41: Connection example with the TST RFUxIO-E
Activate the expansion board by setting the parameter P.800 to 8.

Feig Electronic TST FUZ2-CX Specifications

General

Brand	Feig Electronic
Model	TST FUZ2-CX
Category	Controller
Language	English