1. Summary of components
1-13
Festo P.BE-SPC11 -DGP-EN en 0012NH
Measuring system type MLO-POT-...-TLF ( 7 )
S Use measuring system (potentiometer) type MLO-POT-...-
TLF with the DGP(L)-... .
S Use only a drive and measuring system with the same
stroke length.
S Measuring system type MLO-POT-...-TLF must be longer
than t he d rive st rok e us ed . T here mu s t be an elec t ric
r es erve (s ee sect ion 1. 4) .
S Mount the measuring system and the drive symmetrically,
so that the centre of the measuring sy s tem s troke
matches the centre of the complete drive stroke (see also
System manual type P.BE-SPC11-SYS-...).
S In order to fit measuring system type MLO-POT-...-TLF
reliably and quickly, use fastening kit type BB-TLF-
DGPL-... .
S Fit measuring system type MLO-POT-...-TLF electrically
isolated on the mounting surface with the aid of the
clamps provided.
If measuring system type MLO-POT-...-TLF is used under diffi-
cult ambient conditions (dusty environment):
S Mountitsothatthesidewiththeactuatorslidefaces
downwards. The drip edge on both sides will then prevent
excessive dirt from accumulating on the running surface.
To Next Page
Loading...
