Festo VTEM - 1 About this Document; Applicable Documents; Product Version

Festo — VTEM — 2021-05f
About this document
5
1 About this document
1.1 Applicable documents
All available documents for the product
è
www.festo.com/sp.
Document Product Contents
Assembly instructions CPX, VTEM –
Operating instructions VTEM –
Manual VTEM-MA... Motion app - function - parameterisation
Manual CPX terminal System, description
Application note VTEM Various contents
è www.festo.com/sp è VTEM è Expert knowl-
edge
Tab. 1: Documentation on the product
1.2 Product version
This document refers to the following product versions:
Product Version
VTEM-… Motion Terminal VTEM from revision 01
CTMM-S1-C Controller of the Motion Terminal VTEM from revision 01
Firmware Firmware of the Controller CTMM from version 4.20.0
VEVM-S1-27-… Valve for Motion Terminal VTEM from revision 01
CTMM-S1-D-8E-M8-3 Digital input module for Motion Terminal VTEM from revision 02
CTMM-S1-A-8E-A-M8-4 Analogue input module for Motion Terminal VTEM from revision 02
Browser
1)
–
Firefox from version 38 (recommended)
–
Chrome from version 64
–
Internet Explorer from version 11
–
Microsoft Edge from version 38
1) Use current version.
Tab. 2: Product version
The product version can be identified from the product labelling or with the help of appropriate
software from Festo.
Appropriate software for determining the product version can be found in the Festo Support Portal
è
www.festo.com/sp.
Information on using the software can be found in the integrated Help function.