Festo VTEM - Product Labelling

6
Festo — VTEM — 2021-05f
About this document
There may be an updated version of this document for these or later product versions
è
www.festo.com/sp.
1.2.1 Product labelling
Product labelling is made up of various individual labels. They are shown below.
The Product Key for the Motion Terminal and the associated Data Matrix Code are shown on the labels
on the Motion Terminal (è 1, 4). Scanning the Data Matrix Code with an appropriate device opens
the Festo Support Portal with information appropriate for the product. Alternatively, the Product Key
(11-digit alphanumeric code on the product labelling) can be entered in the search field of the Support
Portal.
1
2
3
4
5
Fig. 1: Product labelling
1
Motion Terminal label with Product Key
(Motion Terminal)
2
Input module labelling
3
Valve labelling
4
Product Key (Motion Terminal)
5
Controller labelling
Motion Terminal labelling
1
2
3
4 5 6
78
Fig. 2:
Motion Terminal labelling
1
Part number
2
Operating pressure range
3
Registration number for KC certification
4
Data Matrix Code
5
Product key
6
Pilot pressure range
7
Revision
8
Serial number