Need help?Do you have a question about the Festo VTEM and is the answer not in the manual?
Lists all available documentation for the VTEM Motion Terminal product.
Details the specific product versions covered by this manual.
Provides essential safety guidelines and precautions for handling the VTEM Motion Terminal.
Defines the proper usage and application scope for the Motion Terminal.
Emphasizes the requirement for qualified personnel for installation and operation.
Provides an overview of the Motion Terminal's pneumatic open-loop and closed-loop control functions.
Information regarding different firmware versions and their associated release notes.
Details the WebConfig interface for commissioning, testing, and parameter setting.
Explains Motion Apps, unique IDs, licensing, and parameter types for pneumatic tasks.
Describes data exchange protocols and structure between the PLC and Motion Terminal.
Specific details on Motion App #01, covering function description, sensors, and parameters.
Guide on performing teach-in runs to acquire peripheral behavior for Motion App execution.
Overview of methods for diagnosing malfunctions using LEDs, CPX diagnostics, and transfer mode.
Step-by-step guide for setting various parameters via transfer mode.
Procedure for retrieving system, application, and tuning parameters using transfer mode.
How to configure sensor parameters for input modules via transfer mode.
Defining parameters for custom drives not supported by Festo.
Method to permanently store parameter settings on the Motion Terminal controller.
Instructions for activating different parameter sets to reconfigure valve behavior.
Contains general technical specifications, characteristic valve values, and pressure/medium parameters.
Lists the various bus nodes compatible with the CPX terminal for controller connection.
Catalog of Festo drives approved for the Motion Terminal, including required parameter values.
Lists all available documentation for the VTEM Motion Terminal product.
Details the specific product versions covered by this manual.
Provides essential safety guidelines and precautions for handling the VTEM Motion Terminal.
Defines the proper usage and application scope for the Motion Terminal.
Emphasizes the requirement for qualified personnel for installation and operation.
Provides an overview of the Motion Terminal's pneumatic open-loop and closed-loop control functions.
Information regarding different firmware versions and their associated release notes.
Details the WebConfig interface for commissioning, testing, and parameter setting.
Explains Motion Apps, unique IDs, licensing, and parameter types for pneumatic tasks.
Describes data exchange protocols and structure between the PLC and Motion Terminal.
Specific details on Motion App #01, covering function description, sensors, and parameters.
Guide on performing teach-in runs to acquire peripheral behavior for Motion App execution.
Overview of methods for diagnosing malfunctions using LEDs, CPX diagnostics, and transfer mode.
Step-by-step guide for setting various parameters via transfer mode.
Procedure for retrieving system, application, and tuning parameters using transfer mode.
How to configure sensor parameters for input modules via transfer mode.
Defining parameters for custom drives not supported by Festo.
Method to permanently store parameter settings on the Motion Terminal controller.
Instructions for activating different parameter sets to reconfigure valve behavior.
Contains general technical specifications, characteristic valve values, and pressure/medium parameters.
Lists the various bus nodes compatible with the CPX terminal for controller connection.
Catalog of Festo drives approved for the Motion Terminal, including required parameter values.
General| Type | VTEM |
|---|---|
| Operating voltage | 24 V DC |
| Category | Touch terminal |
| Protection class | IP65 |
| Communication | Ethernet |
| Housing material | Plastic |
| Ambient temperature | 0 ... +50 °C |
| Storage temperature | -20 ... +70 °C |
To Next Page