EPACO USER’S MANUAL
Revision Date: January, 2010 P/N E06-091 (Rev 0) Page: 1
1.0 INTRODUCTION
This manual is intended for those individuals who are responsible for the interfacing with Fike’s EPACO
explosion protection system. The first-time operator should thoroughly read and understand the instructions
contained within this manual before interfacing with the EPACO system components.
1.1 PRODUCT SUPPORT
If you have any questions or encounter a problem not covered in this manual, you should first try to contact
the Fike Explosion Protection distributor that installed the system as noted below.
For technical support, please contact:
Company Name: _________________________________________
Phone Number: _________________________________________
Fax Number: _________________________________________
E-Mail Address: _________________________________________
If you can not locate the distributor, please call Fike Customer Service using the numbers indicated bellow for
assistance in locating your nearest distributor, or go to our web-site at www.fike.com
.
Fike Blue Springs, USA
Phone: +1-816-229-3405
+1-800-979-FIKE (3453)
Option 23 Explosion Protection Support
Fax: +1-816-229-0314
Or
Fike Europe
Phone: +32-14-21-00-31
Fax: +32-14-21-07-43
1.2 SAFETY INFORMATION
Important safety admonishments are used throughout this manual to warn of possible hazards to persons or
equipment.
a WARNING
Warnings are used to indicate the presence of a hazard
which will or may cause personal injury or death, or loss of
service if safety instructions are not followed or if the hazard
is not avoided.
I Caution
Cautions are used to indicate the presence of a hazard
which will or may case damage to the equipment if safety
instructions are not followed or if the hazard is not avoided.
LNotes: Notes indicate the message is important, but is not
of a Warning or Caution category. These notes can be of
great benefit to the user and should be read.
To Next Page
Loading...
