To Next Page

To Previous Page

Voice

You can choose to enable or disable the voice prompts, keyboard sound or adjust the

volume of the device.

Go to Menu

> Personalize > Voice > Press OK to Enter > Press arrow and OK button to

enable or disable the options:

• Voice Prompt: You can choose to disable or enable the voice greetings or feedback

during the operations.

• Keyboard Prompt: You can choose to enable or disable the beeping sounds when

pressing on the keys

• Volume: You can adjust the volume of the voice greetings/feedback and keyboard

beeps

Bell

You can schedule the device to ring automatically during specific times. This is a remind-

er to alert the employees to start/end work, start/end of break time etc. To activate this

function, you have to create a new bell schedule.

Go to Menu

> Personalize > Bell Schedules > Press OK to Enter > New Bell Schedule > Set

the option accordingly:

• Bell Status: To turn the bell on or off.

• Bell Time: Set the time for the bell to ring automatically.

• Repeat: Set the bell to repeat on certain days or every day.

• Bell Type: You can set for the bell to be triggered from the internal bell or from an ex-

ternal bell that is wired to the device.

• Ring Tone: Select the bells’ preferred ring tone

• Internal Bell Relay: Specifies the time duration for the alarm to ring (ranges from 1s to

999s).

Edit and Delete a Preset Schedule

Once you have created a bell schedule, you can edit or delete the schedule entirely. Edit-

ing the function is similar to adding a new schedule.

FingerTec TA100C User Guide

Other manuals for FingerTec TA100C