T280 / T330 / T400
MMA2017 Rev. D
77
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
AGITATOR AND SEAL ASSEMBLY
Ref. No. Part Number Description No. Required
1 012529 Bearing and Seal Assembly 4
2 012527 Inner Clamping Ring w/ Studs 1 per
3 012528 Agitator Shaft Seal 2 per
4 012525 Outer Clamping Ring 1 per
5 012451 Flangette w/ Lube Coupling 1 per
6 012450 2 in. Dia. Ball Bearing 1 per
7 012452 Flangette w/o Lube Coupling 1 per
008154 Lube Coupling Adapter 1 per
8 012605 Agitator Seal Washer 4 per
9 000Y08 Agitator Hex Nut 4 per
10 012625 2 in. Split Lock Collar 4
11 007705 Grease Fitting 4
022407 Grease Line Elbow 4
012520 Bulk Head Fitting 4
012521 Grease Line Hose 4
12 012504-02 Left-Hand Agitator Assembly (T280) 1
012503-02 Left-Hand Agitator Assembly (T330) 1
13 012496-01 Idle Stub Shaft 1 per
14 F330-0010-01 Bolt-On Paddle 2 per
15 012501-02 Left-Hand Agitator Section (T280) 1 per
012500-02 Left-Hand Agitator Section (T330) 1 per
SE0064-03-02 Left-Hand Agitator Section (T400) 1 per
16 F330-0010-02 Bolt-On Paddle 2 per
17 012495-01 Drive Stub Shaft 1 per
18 012504-01 Right-Hand Agitator Assembly (T280) 1 per
012503-01 Right-Hand Agitator Assembly (T330) 1 per
19 012496-01 Idle Stub Shaft 1 per
20 F330-0010-01 Bolt-On Paddle 2 per
21 012501-01 Right-Hand Agitator Section (T280) 1 per
012500-01 Right-Hand Agitator Section (T330) 1 per
SE0064-03-01 Right-Hand Agitator Section (T400) 1 per
22 F330-0010-02 Bolt-On Paddle w/ Identification Hole 2 per
23 012495-01 Drive Stub Shaft 1 per
To Next Page
Loading...
