8
INTRODUCTION
The FINN Corporation would like to thank you for your latest FINN purchase. In our efforts to
maintain a quality and growing relationship with every customer, we would like to encourage you
to contact us for help with service, genuine replacement parts, or for any other information you
may require.
THE FINN MATERIAL BLOWER AND ITS FUNCTION
The FINN Material Blower is an apparatus for conveying and discharging bulk materials, such as
bark mulch, at a fast and uniform rate utilizing a minimum amount of manpower. The product to
be used is generally composted and processed, then used as a soil amendment, a ground cover
for erosion and weed control, or for decorative purposes on landscaping (bark mulch).
This manual is intended to provide step-by-step instructions on the operation, care, and
maintenance of the Material Blower. In addition, it contains illustrations and a complete list of
parts and components for easy identification.
HOW THE MATERIAL BLOWER WORKS
The bulk material is loaded into the hopper by a loader or by a feed elevator. Located at the
bottom of the hopper is a drag chain conveyor that conveys the bulk material to an opening, in
the rear of the hopper, containing a feed roll. The feed roll and drag chain conveyor feed the bulk
material into an airlock. The airlock is specifically designed and built to handle tough, fibrous
material. The function of the airlock is to take the bulk material into open pockets exposed to the
outside air and to convey it to an area where the pocket is closed off. At that point a high volume /
low pressure air stream, created by the blower, is channeled through the pocket, carrying the
material out of the airlock and through the hose for discharge.
For best results and to ensure safe operation and long life of the
equipment, please read and follow all instructions carefully.
OPERATION AND MAINTENANCE MANUAL
FOR FINN MATERIAL BLOWER
To Next Page
Loading...
