Finn MBH6 - Lubrication Chart

77
FLUID CAPACITIES
Fuel 27.5 Gallons (103.7 L)
Hydraulic Oil 25.5 Gallons (96.5 L)
Engine Coolant See engine manual
Engine Oil See engine manual
Gear Box Oil 20 ounces (0.6 L)
Blower Oil 16.9 ounces (0.5 L)
LUBRICATION CHART
Ref. No. Location Lubricant Frequency Number
1 Lubricate Air Lock Bearing CL Weekly 2
2 Change Air Lock Gearbox Oil GO Seasonally 1
3 Lubricate Feeder Roll Bearing CL Weekly 5
4 Lubricate Floor Pillow Block Bearing CL Weekly 2
5 Lubricate Floor Take-Up Bearing CL Weekly 2
6 Check Blower Inlet Filter Daily 1
7 Check Engine Air Cleaner Daily 1
8 Check Engine Coolant Level AF Daily 1
9 Change Engine Oil and Filter EO See Engine Manual 1
10 Check Engine Oil Level EO Daily 1
11 Check Fuel Level DF Daily 1
12 Check Hydraulic Oil Level HO Daily 1
13 Check Blower Oil Level BO Daily 1
14 Lubricate Floor Chain CH Seasonally 1
15 Change Engine Coolant AF Seasonally 1
16 Change Hydraulic Oil and Filter HO Seasonally 1
17 Change Blower Oil BO Seasonally 1
LUBRICATION OR FLUID USED
CL Chassis Lubricant
BO Blower Oil
[if ambient operating range is from 32° F to 90° F, use ISO Grade 100 Extreme Pressure Gear Oil;
if ambient operating range is above 90° F, use ISO Grade 150 Extreme Pressure Gear Oil]
AF 50/50 Anti-Freeze and Water Mixture
DF Diesel Fuel
HO Hydraulic Oil
[Finn Vulhydra hydraulic oil or the closest ISO equivalent (see Hydraulic System section)]
GO 90 W Gear Oil
CH Mineral Oil or Chain Lubricant
EO Engine Oil, 15W - 40
TIME KEY
Daily (8 hours)
Weekly (40 hours)
Seasonally (500 hours
See Engine Manual