Finn MBH6 - Page 35

29
CONTROL PANEL GUIDE AND SYSTEM OPERATION (CONTINUED)
RUNNING UNIT WITHOUT RADIO REMOTE (CONTINUED)
Turn the ignition
key clockwise to the
START position.
Once the engine
starts, the key will
return to RUN position
during operation.
This screen will
appear on the display
and the unit is now
ready for operational
commands.
Pressing the
BLOWER softkey or
the FLOOR softkey
on the control panel
will put the system in
LOCAL MODE. At this
point, FLOOR and
BLOWER commands
from the control panel
will be accepted and
the radio remote will
be locked out from
control.
To use the radio
remote, both the floor
and the blower will
need to be turned off.
Refer to the Running Unit with Radio Remote section for more information.