Finn MBH6 - Page 37

31
CONTROL PANEL GUIDE AND SYSTEM OPERATION (CONTINUED)
RUNNING UNIT WITH RADIO REMOTE
The unit is now
ready for operational
commands from the
radio remote.
ON THE RADIO
REMOTE, press the
RUN toggle switch
before the MATERIAL
FEED toggle switch
on the radio remote
to put the system in
RADIO MODE. At this
point, RUN (BLOWER)
and MATERIAL FEED
(FLOOR) commands
from the radio remote
will be accepted and
FLOOR and BLOWER
commands from the
control panel will be
locked out.
To return to control
panel use, both the
floor and the blower
will need to be turned
off and the radio
remote will need to be
powered off.
MATERIAL FLOOR
STOP
Toggle Switch
Run (Blower) On / Off
Toggle Switch
Material Feed (Floor) On / Off