Finn MBH6 - Page 54

48
CONTROL PANEL GUIDE AND SYSTEM OPERATION (CONTINUED)
OPTIONS SCREEN - RADIO REMOTE DIAGNOSTICS (CONTINUED)
Return to the radio
remote diagnostics
screen.
Press RF SIGNAL
TEST softkey.
Pressing RF SIGNAL
TEST softkey on the
control panel will flash
the “STOP” indicator
light blue on the radio
handheld at a constant
rate. If rate becomes
less consistent, the
RF signal quality is
dropping.
Use this feature to
test RF signal quality
when working in an
environment that may
be prone to RF signal
interference.
This feature can be used to help prevent engine shutdowns due to loss of RF signal.