58
CONTROL PANEL GUIDE AND SYSTEM OPERATION (CONTINUED)
OPTIONS SCREEN - REGENERATION (CONTINUED)
MANUAL STATIONARY REGENERATION - OPERATOR REQUEST
The operator has the option of performing a Manual Stationary Regeneration should work
conditions/schedule require. Manual Stationary Regeneration can only be completed after the
engine has accumulated 50 hours or more since its last regeneration.
1. Move the
machine to a
well-ventilated
and safe
location.
2. Press REGEN
softkey.
3. Press the
HYDRAULIC
INTERLOCK
softkey.
To Next Page
Loading...
