Panda fpControl
27.5.20 Chapter 2: Panda fpControl - Page 35
Fig. 2.5.2.9-1: Sub-menu: Flashing when Faulty"Off" or "Error" or "Warning and Error" can be selected by
using the "Step-up"/"Step-down" keys and then confirmed
with the "Start/Stop-Enter“ key.
The "Back" item returns you to the Panel sub-menu.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop-
Enter“ key.
2.5.2.10 Setting the Panel Heating
The menu item is selected by using the "Step-up"/"Step-down" keys and confirmed with the "Start/Stop-Enter“ key.
The respective menu item opens.
Fig. 2.5.2.10-1: Sub-menu: Panel Heating"Off" or "On" can be selected by using the "Step-up"/"Step-
down" keys and then confirmed with the "Start/Stop-Enter“
key.
The "Back" item returns you to the Panel sub-menu.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.
2.5.2.11 Setting the display of the optional measurement data
The menu item is selected by using the "Step-up"/"Step-down" keys and confirmed with the "Start/Stop-Enter“ key.
The respective menu item opens.
Fig. 2.5.2.11-1: Sub-menu: Optional Measurement DataThe desired optional measurement data is changed by using
the "Step-up"/"Step-down" keys and the setting is confirmed
with the "Start/Stop-Enter“ key.
The desired option is selected by using the "Step-up"/"Step-
down" keys and the setting is confirmed with the "Start/Stop-
Enter“ key.
The "Back" item returns you to the Panel sub-menu.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop-
Enter“ key.
2.5.2.12 Supplementary Start-up functions
Fig. 2.5.2.12-1: NoteThis menu item is only available in the case of inverter
generators
The menu item is selected by using the "Step-up"/"Step-down" keys and confirmed with the "Start/Stop-Enter“ key.
The respective menu item opens.
To Next Page
Loading...