Fischer Panda fpControl - Faults, Symbols, and Error Codes; Symbols and Messages on Display; Example Messages (Sensor Issues); Error Code Display and Interpretation

To Next Page

To Previous Page

Panda fpControl

Page 40 - Chapter 2: Panda fpControl 27.5.20

The menu text is now set to the selected language.

2.6 Faults

2.6.1 Symbols and messages on the display

2.6.1.1 Example of message - "Sensor defective"

Fig. 2.6.1.1-1: Sensor defectiveA soon as a defective sensor is detected, the fpControl

reports this on the display.

2.6.1.2 Example of message - "Sensor/Cable break"

Fig. 2.6.1.2-1: Sensor/Cable breakIf the sensor has failed or the cable is broken, the

following report is displayed:

2.6.2 Error code

An error code is displayed if a parameter lies beyond its operating limits.

Siehe “Table of Faults” auf Seite 41. Siehe “Description of the symbols” auf Seite 43.

Example: Error No. 7 - Oil pressure too low -Fault led to emergency shutdown

Fig. 2.6.2.0-1: Sub-menu: "Event Memory"

NoteBy using the QR Code, the relevant fault page of the

knowledgebase.fischerpanda.de can be called up via the

Internet.

To do so, simply scan the QR Code with a smartphone

(Internet connection required).

QR Code

Error type

Error number

Error symbol/

Error text

(Warning/Error shutdown)