Need help?Do you have a question about the Fischer Panda fpControl and is the answer not in the manual?
General| Brand | Fischer Panda |
|---|---|
| Model | fpControl |
| Category | Control Systems |
| Language | English |
Details who can perform system installations and settings.
Provides critical safety guidelines for operating the generator system.
Explains the intended operational purpose of the fpControl system.
Defines the correct and intended application of the fpControl.
Details the various components that make up the fpControl system.
Information on the Control Panel - Generator unit.
Information on the Generator Control - Servo module.
Information on the Connection Box - Generator module.
Details connections and specs for the CB-G module.
Details the CAN interface for SAE J1939 communication.
Outlines connections and specs for the CI-SAE J1939 interface.
Information on MU-3ph/DC and MM-3 measurement units.
Details connections and specs for measurement units.
Instructions for installing the GC-S ECU module.
Instructions for installing the CB-G connection box.
Details on installing the CP-G control panel module.
Procedure for powering on the generator system via the control panel.
Explanation of the overview page when Autostart is enabled.
Describes the various overview pages for VCS generator monitoring.
Details various overview pages for generator status and parameters.
Information about the final overview page displayed in the system.
Details AGT generator overview pages 1 through 5.
Explains battery guard and UIU charging process.
Defines parameters related to the battery charging curve.
Details inverter overview pages 1 through 6.
Information about the final overview page displayed in the system.
Daily checks and preparations for starting the generator in marine applications.
Daily checks and preparations for starting the generator in vehicle applications.
Step-by-step guide for starting the generator system.
Procedure for safely stopping the generator unit.
Overview of the main menu options available on the control panel.
Details settings for the control panel display and functions.
Adjusting display brightness and contrast of the CP-G.
Configures standby settings, display modes, and panel language.
Configures temperature unit, alarms, flashing, and panel heating.
Managing optional data display and supplementary start-up functions.
Restoring panel sub-menu settings to factory defaults.
Details generator settings: autostart, outputs, event memory.
Configuring the automatic start-up function of the generator.
Configures DC outputs and switching outputs for the generator.
Accessing the log of system events and faults.
Resets generator settings and panel language to default.
Explains the meaning of symbols and messages shown on the display.
Illustrates 'Sensor defective' and 'Sensor/Cable break' messages.
Details error code display, QR codes, and their implications.
Comprehensive list of fault codes, their descriptions, and basic meanings.
Explains the meaning of various symbols used in the system interface.
Details FP Bus Cable and Terminating Resistor accessories.
Details the adapter frame for mounting the control unit.
Provides technical drawings and dimensions for the CP-G unit.
To Next Page