FläktGroup Multi-DENCO - Scope of Supply; Accessories and Special Equipment; Directives and Regulations; References Within Manual

Multi-DENCO Overview of Units and Scope of Supply
FläktGroup DC-2013-0101-GB • Subject to modifications • R5-08/2020 11
1.5 Scope of supply
A typical order of a Multi-DENCO unit could consist of (but is not limited to):
– Indoor unit of Multi-DENCO configuration with associated internal options fitted for
items requiring installation external to the unit, hardware is provided loose within the
unit)
– Outdoor unit / Heat Rejection (Optional) a condenser, condensing unit, drycooler
or watercool module to act as a heat rejection unit for the system
– Unit documentation
– A copy of the current operation manual (indoor and/or outdoor)
– User Controls manual
– Wiring diagrams for both indoor and outdoor units
– Dimensional drawing
– Spare part list in the form of a label or a printed sheet
– Accessories (optional) Any other accessories that may be required for the indoor
or outdoor unit, for example; plinths, base stands, ceiling return sections etc. may
be provided in separate packaging
1.6 Accessories and special equipment
Multi-DENCO units can be designed with a vast number of accessories and features.
To determine the scope of options fitted to your unit, compare the supplied unit 'Model
Number' with the unit model number specified in the typecode.
1.7 Directives and regulations
We certify that products supplied within the range of Multi-DENCO conform to, meet
and/or exceed the requirements of the following directives and regulations:
– Directive on Machinery 2006/42/EC
– Low Voltage Directive (LVD) 2014/35/EU
– Electromagnetic Compatibility (EMC) 2014/30/EU
– Pressure Equipment Directive 2014/68/EU
1.8 References within manual
The following references to standards and regulations are made within this manual.
These may be updated or revised by their relevant bodies, after publication of this man-
ual. In all instances, we recommend that you review and work to the latest version of
any standards.
EN 378
EN ISO 3745
2014/68/EU
2006/42/EC
2014/30/EU
2014/35/EU
EN 12735-1
EN 60204-1
(EU) No. 517/2014
2008/98/EC
2012/19/EU