Safety and User Information Multi-DENCO
18 FläktGroup DC-2013-0101-GB • Subject to modifications • R5-08/2020
2.6 Safety-conscious working
The following is general advice. Specific information can be found in relevant chapters
in this manual.
2.6.1 At all times
To comply with EN 378-3 you must wear suitable Personal Protective Equipment
(PPE) at any point working on a Multi-DENCO unit. As a minimum we recommend to:
• Wear safety footwear
• Wear eye protection
• Wear protective gloves
• Wear protective clothing
If operating for a prolonged period of time, noise reducing ear protection may be
required.
• Always conduct your own personal risk assessment to evaluate any further
requirements.
2.6.2 During installation & commissioning
At these times there are higher risks involved with the handling and operating around
a Multi-DENCO system. Further information is provided in chapters 4 to 8.
• Always refer to the latest operation manual and technical documents provided with
the unit.
• Do not make assumptions based on other products design or documentation.
• If in doubt, contact your local sales office.
• Protect against unauthorised access.
• Do not use or employ un-qualified or inexperienced workers to install, commission
or service the Multi-DENCO system.
Filters (especially used or dirty filters) are easily flammable. Leaking refrigerant can
catch fire and emit noxious substances.
– No smoking is allowed in direct proximity of any aspect of the
Multi-DENCO system.
– No open flames near the system.
During installation there is a higher chance of leaks of refrigerant or glycol.
Before adding any cooling medium, ensure:
– Any system pipework is thoroughly tested for leaks
– Use non-polluting methods for testing purposes, e.g. Oxygen Free Nitrogen (OFN)
To Next Page
Loading...
