Multi-DENCO Shipping and Storage
FläktGroup DC-2013-0101-GB • Subject to modifications • R5-08/2020 35
• Before lifting or shipping the unit, make sure that all mountings are fixed and
secured.
• Only use lifting gear with sufficient load carrying capacity.
• Never use damaged lifting equipment.
• Ropes/chains shall not be knotted or be exposed to sharp edges.
• Only use ropes/chains of the same length.
• Move the unit carefully without fast irregular movements.
• Always set the unit down gently, without a large impact.
• Take steps to avoid twisting the unit frame during positioning.
• If necessary, use a specialist company to transport and position the unit.
Fig. 4-2: Handling of unit in export packing and wooden crate
Unit placement is covered by chapter 5.3.
4.3 Storage
Storage conditions for uninstalled units
Air temperature: -20 °C to +50 °C
Air humidity: up to 90% (relative humidity with no condensation)
During storage, the unit and packaging must be in a protected environment and not
exposed to the outdoor environment.
Use slings to secure the unit against tilting!
NOTE!
The only valid dimensional drawing is enclosed with the unit documentation.
To Next Page
Loading...
