FläktGroup Multi-DENCO - Safety and User Information Introduction

Safety and User Information Multi-DENCO
12 FläktGroup DC-2013-0101-GB • Subject to modifications • R5-08/2020
2 Safety and User Information
The Multi-DENCO range is designed in accordance with state-of-the-art technological
and engineering standards as well as conforming to recognised safety regulations.
It must be used in an appropriate manner for suitable purpose. You must follow the
guidelines within this manual and take account of safety aspects and potential hazards.
Failure to follow the instructions within this manual may result in material damage,
incorrect operation or danger to health and safety. This manual attempts to give advice
on as many potential risks or hazards as possible, however it is unable to account for
all potential situations.
Therefore, all users must employ, or be qualified as, a trained professional to assess
and minimise any potential hazards, before handling the Multi-DENCO unit or acces-
sories.
2.1 Availability of the operation manual
This operation manual contains important information regarding safe and correct oper-
ation of the unit.
This manual must always be available at the site where the unit is operating. Every per-
son working on the equipment must read this manual fully before commencing any
work. They must observe and understand all relevant information before performing a
task.
The Operation Manual is intended to be used by:
– Fitting and installation companies
– Building service engineers
– Technical personnel
– Electrical and mechanical specialist
2.2 Scope of the operation manual
THIS IS AN ORIGINAL OPERATION MANUAL VERIFIED BY THE MANUFACTURER.
This document has been developed by the manufacturer specifically for details the
Multi-DENCO range. Information within this manual may be common to other designs
or products, but this manual is exclusive to Multi-DENCO and is non-transferable.
The information should not be used as a basis for any other products.
Every effort is made to ensure this manual is fair and accurate, but FläktGroup endeav-
ours to continuously update and improve all of our products. Due to this continuous
development, some information contained within this manual may become outdated or
no longer relevant. If you are in any doubt regarding any information contained within
this document, please contact your local sales or support representative who will be
happy to assist you further.