Flashforge DREAMER - Tool Menu Options; Tool; Filament: To load;unload the filament.; Level: To adjust the build plate.

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
58
Tool
Tap [Tool] to enter tool options.
Filament: To load/unload the filament.
Level: To adjust the build plate.
Home: To make the X, Y and Z axes
back to the zero point.
Manual: To manually adjust the
positions of X, Y and Z axes.
Setting: To implement relevant function
setups.
Status: To check the real-time status of
the printer.
About: Information about the printer.
Back
Manual adjustment
Y+: The extruder moves to the zero
point, that is, the back of the machine
Y-: The extruder moves to the direction
opposite to the Y+.
X+: The extruder moves to the zero
points, that is, to the right direction
X-: The extruder moves to the direction
opposite to the X+.
Z+: The build plate elevates.
Z-: The build plate descends.
Back