12
ARPEX 8706 en
Operating instructions 10/2017
4. Transport and storage
Observe the instructions in section 3, "Safety instructions"!
4.1 Scope of supply
The products supplied are listed in the dispatch papers. Check on receipt to ensure that all the products
listed have actually been delivered. Parts damaged and/or missing parts must be reported to Flender in
writing immediately.
4.2 Transport
Different forms of packaging may be used depending on the size of the coupling and method of transport.
Unless otherwise agreed, the packaging complies with the HPE Packaging Guidelines.
The following symbols with their meanings are applied to the packaging and must be observed:
Top Fragile Keep dry Keep cool Centre of
gravity
Use no hand
hook
Attach
here
Fig. 2: Transport symbols
DANGER
Danger of explosion
Risk of explosion when operating in potentially explosive areas.
Damaged coupling modules and coupling parts are potential explosion hazards.
Use only undamaged coupling components. Operating the coupling with damaged coupling parts is not
permitted in potentially explosive environments in accordance with Directive 2014/34/EU.
WARNING
Serious injury
Risk of serious injury through falling components or quenching.
Damage to coupling parts when using unsuitable transport equipment.
When handling these products, use only lifting and handling equipment of sufficient loadbearing
capacity.
Transport of the coupling must be carried out so as to avoid personal damage and damage to the
coupling.
NOTICE
Material damage
Risk of material damage if not observing the packaging symbols.
The symbols marked on the packing must be observed.
To Next Page
Loading...
