55
ARPEX 8706 en
Operating instructions 10/2017
8. Operation
Observe the instructions in section 3, "Safety instructions"!
8.1 General operating data
During operation of the coupling watch for:
• Changes in running noise
• Sudden vibrations
WARNING
Serious injury
Rotating components may cause injury during work on the still rotating coupling.
All work on the coupling must be carried out only when it is at a standstill. Secure the drive unit to prevent
unintentional switchon. A notice should be attached to the ON switch stating clearly that work on the
coupling is in progress. The relevant accident prevention regulations at the place of installation apply as
well.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or risk of damage to the coupling.
If any malfunctions or changes are noticed during operation, the drive assembly must be switched off
at once.
To Next Page
Loading...
