63
ARPEX 8706 en
Operating instructions 10/2017
12. Declarations
12.1 EU declaration of conformity
EU declaration of conformity
The manufacturer, Flender GmbH, 46395 Bocholt, Germany, declares that the equipment described in these
operating instructions:
FLENDER COUPLINGS ARPEX®
ART, ARE
is in conformity with Article 1 and Article 13, Paragraph 1 b) ii) of Directive 2014/34/EU and complies with the
requirements of Directive 2014/34/EU and the following standards:
EN 1127-1 : 2011
EN 13463‐1 : 2009
EN 13463‐5 : 2011
EN 1710 : 2008
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
Directive 2014/34/EU OJ L 96, 29.03.2014, p.309-356 (effective from 20.04.2016, 00:00 a.m.)
Directive 94/9/EC OJ L 100, 19.04.1994, p.1-29 (effective until 19.04.2016, 12.00 p.m.)
The technical documentation has been delivered to the body named below:
DEKRA EXAM GmbH, 44727 Bochum, Germany, code number: 0158.
Bocholt, 2017‐10‐01
Felix Henseler, Head of PD MD AP
Bocholt, 2017‐10‐01
Thomas Tebrügge / Head of PD MD AP COU BA
To Next Page
Loading...
