FLENDER ARPEX - Page 30

30
ARPEX 8706 en
Operating instructions 10/2017
3
4
3
1
3
2
B
X
M
Fig. 20: Fitting "B", "X" modules and "M"hubs
1"B" module
3 Shaft end
2"M" hub
4"X" module
NOTICE
Material damage
Damage to the coupling and the shaft.
– The information specified on the dimensioned drawing relating to the pullingon path must be
observed.
– Observe the orderrelated entries on the drawing of the coupling relating to the joining temperature.
WARNING
Danger of burns
Serious injury through burns on hot surfaces (> 55 °C) possible.
Wear suitable protective gloves and protective clothing.
WARNING
Risk of serious injury through flying fragments
Risk of serious injury through flying fragments and/or risk of damage to the coupling.
The coupling parts must be held in position on the shaft with the aid of a suitable retaining device, until
they cool down and seat firmly.