Flexim FLUXUS F705**-NN Series User Manual

8 Start-up of the Transmitter FLUXUS F70x
UMFLUXUS_F7V4-6-2EN, 2017-10-01 89
8.3.3 Navigation
8.4 HotCodes
A HotCode is a key sequence that activates certain functions and settings:
A HotCode can be entered in the main menu after pressing key C. The HotCode is not displayed during the input.
A vertical arrow ↕ will be displayed if the menu item contains a scroll list. The current list item will be displayed in the lower
line.
Use key and to select a list item in the lower line. Press ENTER.
Some menu items contain a horizontal scroll list in the lower line. The selected list item is displayed in capital letters and
in angle brackets.
Press key and to scroll through the lower line and select a list item. Press EN-
TER.
Some menu items contain a horizontal scroll list in the upper line. The selected list item is displayed in capital letters and
in angle brackets. The current value of the list item is displayed in the lower line.
Press key and to scroll through the upper line and select a list item.
Press key and to scroll through the lower line and select a value for the selected
list item.
Press ENTER.
function HotCode see section deactivation
language selection 9090xx 8.5
enabling of the FastFood mode 007022 11.7.1 HotCode 007022
manual input of the lower limit for
the inner pipe diameter
071001 11.9
activation of the SuperUser mode 071049 15.1 HotCode 071049
change of the transmission param-
eters of the RS232 interface
232-0- 12.2.4
activation of the BTU mode 007025 16.3.1 HotCode 007025
resetting the contrast of the display
to medium
555000 14.4
Parameter ↕
for Channel A:
8
2
Lining
no >YES<
4
6
R1=FUNC<typ mode
Function: MAX
4
6
8
2

Flexim FLUXUS F705**-NN Series Specifications

General

Brand	Flexim
Model	FLUXUS F705**-NN Series
Category	Measuring Instruments
Language	English