16 Advanced functions
16.12 Behavior of the alarm outputs FLUXUS G801
2020-06-26, UMFLUXUS_G801V1-0EN
144
16.12.5 Deactivation of an alarm output
If the programmed outputs are no longer required, they can be deactivated. The configuration of a deactivated output is
stored and will be available if the output is activated again.
• Select no in the menu item Alarm Output to deactivate an output.
• Press ENTER.
Tab. 16.4: Pictograms for the alarm state indication
no. func
(switching condition)
typ
(holding behavior)
mode
(switching function)
current state
R =
OFF NON-HOLD NO Cont. closed
1 MAX HOLD NC Cont. open
2 MIN
3 +→- -→+
QUANT.
ERROR
Example
R1 =
Output Options\...\Alarm Output
To Next Page
Loading...
