Flexim FLUXUS G801 - Setting of the Standard Conditions for Gas Measurements; Libraries

18 Settings
FLUXUS G801 18.3 Setting of the standard conditions for gas measurements
157
UMFLUXUS_G801V1-0EN, 2020-06-26
18.3 Setting of the standard conditions for gas measurements
• Select the menu item Gas-Measuring.
• Press ENTER.
This display will only be indicated if the gas measurement has been activated in the menu item Special Funct.\
SYSTEM settings\Measuring.
• Enter the pressure for the local standard conditions.
• Press ENTER.
• Enter the temperature for the local standard conditions.
• Press ENTER.
18.4 Libraries
The internal database of the transmitter contains parameters for pipe and lining materials as well as for fluids.
The material and fluid scroll lists displayed in the program branch Parameter can be arranged. Shorter scroll lists make
work more effective.
• Select the menu item Libraries.
• Press ENTER.
• Select Material list to edit the material scroll list or Medium list to edit the fluid scroll list.
• Select go back to return to the menu item SYSTEM settings.
• Press ENTER.
• Select factory if all materials/fluids of the internal database are to be displayed in the scroll list. An already existing
customized scroll list will not be deleted but only deactivated.
• Select user to activate the customized scroll list.
• Press ENTER.
If user is selected, the material or fluid scroll list can be edited.
• Select End of Edit to stop editing.
• Press ENTER.
• Select yes to store all changes of the scroll list, or no to quit the menu item without storing.
• Press ENTER.
Special Funct.\SYSTEM settings\Gas-Measuring
Special Funct.\SYSTEM settings\Gas-Measuring\Norm/Std press.
Special Funct.\SYSTEM settings\Gas-Measuring\Norm/Std temper.
Special Funct.\SYSTEM settings\Libraries
Special Funct.\SYSTEM settings\Libraries\Material list
Special Funct.\...\Material list\user\Show list
Special Funct.\...\Material list\user\End of Edit
Special Funct.\...\Material list\user\Save List?