Flexim FLUXUS G801 - Initialization and HotCodes

8 Start-up
FLUXUS G801 8.4 HotCodes
79
UMFLUXUS_G801V1-0EN, 2020-06-26
8.4 HotCodes
A HotCode is a digit sequence that activates certain functions and settings.
• Select the menu item Miscellaneous.
• Press ENTER.
• Select yes to enter a HotCode.
• Press ENTER.
• Enter the HotCode.
• Press ENTER.
If the entered HotCode is invalid, the error message INVALID HOTCODE will be displayed.
• Press ENTER.
• Select yes to re-enter a HotCode, or no to return to the menu item Miscellaneous.
• Press ENTER.
8.5 Language
The language can be selected with the following HotCodes:
After the last digit has been entered, the main menu is displayed in the selected language.
The selected language remains activated when the transmitter is switched off and on again. After an initialization of the
transmitter, the language is reset to default.
Special Funct.\SYSTEM settings\Miscellaneous
Input a HOTCODE
Please input a HOTCODE: 000000
Input a HOTCODE
function HotCode
reset of the display to medium contrast 555000
language selection 9090xx
enabling/disabling the FastFood mode 007022
settings of transducer temperature output and flow velocity storing 007043
manual input of the lower limit for the inner pipe diameter 071001
activation/deactivation of the SuperUser mode 071049
change of the transmission parameters for service interface RS232 232-0-
language HotCode
English 909044
German 909049
French 909033
Spanish 909034
Dutch 909031