FLIR E95 User Manual

Changing settings
24
◦ Time zone.
◦ Date & time.
◦ Date & time format.
• Focus: This submenu includes the following settings:
◦ Autofocus: When autofocusing, the infrared camera can use one of the following fo-
cus methods:
– Contrast: The focus is based on maximizing the image contrast.
– Laser: The focus is based on a laser distance measurement. The laser is on when
the camera is autofocusing.
◦ Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
◦ Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
Note You can also enable/disable screen rotation on the swipe-down menu. For
more information, see section 8.4 Swipe-down menu, page 23.
◦ Image overlay information: This setting specifies what image information the camera
will display as an overlay on the image. For more information, see section 8.5 Image
overlay information, page 23. You can select the following information to display:
– Compass.
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: The screen brightness slider is used to control the brightness of
the screen.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 8.4 Swipe-down menu, page 23.
• Geolocation: This submenu includes the following settings:
◦ GPS: This setting is used to enable/disable the GPS.
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 10.19 Calibrating the compass, page
48.
• Lamp & laser: This submenu includes the following settings:
◦ Enable lamp & laser: This setting is used to enable the camera lamp and the laser.
◦ Enable lamp & laser + Use lamp as flash: This setting is used to enable the flash
function. When the flash function is enabled, the camera lamp will flash when an im-
age is saved.
◦ Disable all: This setting is used to disable the camera lamp, laser, and flash function.
• Auto power off: This setting defines how soon the camera is automatically turned off.
Available choices are Off, 5 min, and 20 min.
• User interface options: This submenu includes the following settings:
#T810190; r. AI/41890/41890; en-US
101

FLIR E95 Specifications

General

Brand	FLIR
Model	E95
Category	Thermal cameras
Language	English