Changing settings
24
◦ Manual adjustment mode: This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span. For more infor-
mation, see section 13.3 Adjusting the infrared image, page 60.
◦ Emissivity mode: This setting specifies how the measurement parameter emissivity
will be entered. Available options are Select values and Select from materials table.
For more information, see section 13.6 Changing the measurement parameters,
page 64.
• Volume: The volume slider is used to control the volume of the built-in speaker.
• Reset options: This submenu includes the following settings:
◦ Reset default camera mode...: This setting will affect the image mode, color palette,
measurement tools, and measurement parameters. Saved images will not be
affected.
◦ Reset device settings to factory default...: This setting will affect all camera settings,
including regional settings. Saved images will not be affected. The camera will be re-
started and you will be prompted to set the regional settings.
◦ Reset image counter...: This setting will reset the numbering of the image filenames.
To prevent image files being overwritten, the new counter value will be based on the
highest existing filename number in the image archive.
Note When a reset option is selected, a dialog box is displayed with more information.
You can choose to execute the reset action or to cancel.
• Camera information: This submenu displays information about the camera. No changes
can be made.
◦ Model.
◦ Serial number.
◦ Part number.
◦ Software: The version of the software.
◦ Storage: The used and free space on the memory card.
◦ Lens: The field of view of the lens.
◦ Battery: The remaining battery capacity (in percent).
◦ Register camera...: This will start the registration wizard. For more information, see
section 6 Register the camera, page 12.
◦ Licenses: Open-source license information.
• Regulatory: Displays regulatory information about the camera. No changes can be
made.
#T810190; r. AI/41890/41890; en-US
102
To Next Page
Loading...
Need help?
General
