Technical data22
Imaging and optical data
Zoom 1–8× continuous, digital zoom
Digital image enhancement Noise reduction filter, high sensitivity mode (HSM)
Detector data
Detector type Focal plane array (FPA), cooled QWIP
Spectral range
10.3–10.7 µm
Detector pitch 30 µm
Sensor cooling Stirling Microcooler (FLIR MC-3)
Detects following gases Sulfur Hexafluoride (SF6), Acetyl Chloride, Acetic
Acid, Allyl Bromide, Allyl Chloride, Allyl Fluoride,
Ammonia (NH3), Bromomethane, Chlorine Dioxide,
Ethyl Cyanoacrylate, Ethylene, Furan, Hydrazine,
Methylsilane, Methyl Ethyl Ketone, Methyl Vinyl Ke-
tone, Propenal, Propene, R 134a, Tetrahydrofuran,
Trichloroethylene, Uranyl Fluoride, Vinyl Chloride,
Vinyl Cyanide, Vinyl Ether
Electronics and data rate
Full frame rate 60 Hz
Image presentation
Display
Built-in widescreen, 4.3 in. LCD, 800 × 480 pixels
Viewfinder Built-in, tiltable OLED, 800 × 480 pixels
Automatic image adjustment
Continuous/manual; linear or histogram based
Manual image adjustment Level/span
Image presentation modes
Image modes IR image, visual image, high sensitivity mode
(HSM)
Measurement
Temperature range –40°C to +500°C (–40°F to +932°F)
Accuracy ±1°C (±1.8°F) for temperature range (0°C, to
+100°C, +32°F to +212°F) or ±2% of reading for
temperature range (>+100°C, >+212°F)
Measurement analysis
Spotmeter
10
Area
5 boxes with max./min./average
Profile 1 live line (horizontal or vertical)
Difference temperature Delta temperature between measurement func-
tions or reference temperature
Reference temperature Manually set or captured from any measurement
function
Emissivity correction Variable from 0.01 to 1.0 or selected from editable
materials list
Reflected apparent temperature correction Automatic, based on input of reflected temperature
Measurement corrections Reflected temperature, distance, atmospheric
transmission, humidity, external optics
#T559157; r. AH/45951/45951; en-US
118
To Next Page
Loading...
Need help?
General
