FLIR ThermaCAM E320 User Manual

ActionStep
Remove the lid of the battery compartment by pressing the locking mechanism.1
Remove the battery by firmly grabbing its rear end and carefully lifting it out from
the battery compartment.
2
Replace the lid of the battery compartment.3
For more information about the battery system, see section 11 – Electrical power
system on page 79.
8
Publ. No. 1558407 Rev. a155 – ENGLISH (EN) – February 6, 2006 55
8 – Tutorials

FLIR ThermaCAM E320 Specifications

General

Brand	FLIR
Model	ThermaCAM E320
Category	Thermal cameras
Language	English