Flowserve Pump Division - 5
FOREWORD
Flowserve Pump Division products are the result of more than a century of progressive study and
development. Advanced design, proper selection of materials and precision construction reflect this wide
experience.
Flowserve Pump Division products are designed to give trouble-free, efficient operation with minimum
maintenance and repair. This instruction book will familiarize management and operating personnel with
pertinent details and procedures for the installation, operation and maintenance of these pumps.
The spaces below are for your identification of the equipment to which the book applies.
Unit Size Serial No. Identification No.
WARNING: THESE PUMPS (OR PROTOTYPES) HAVE BEEN SHOP TESTED AND FOUND
SATISFACTORY FOR THE CONDITION FOR WHICH THEY WERE SOLD.
DO NOT OPERATE IN EXCESS OF THEIR RATED CAPACITY, SPEED, PRESSURE,
AND TEMPERATURE. REFER TO MOTOR NAMEPLATE FOR APPLICABLE
RATINGS
BE SURE THAT THE FOLLOWING GUIDELINES ARE MET WITH RESPECT TO AC
POWER:
1. SUPPLY POWER IS WITHIN 10% OF RATED VOLTAGE AT RATED
FREQUENCY.
2. SUPPLY POWER IS WITHIN 5% OF RATED FREQUENCY AT RATED VOLTAGE.
3. COMBINED VARIATION IN VOLTAGE AND FREQUENCY IS WITHIN 10% (SUM
OF ABSOLUTE VALUES) OF RATED VALUES.
STUDY THIS INSTRUCTION BOOK
The descriptions and instructions contained within this manual cover the standard equipment design and
many common variations. This manual does not cover all design details and variations, nor does it
provide for every possible contingency that may be encountered. When information cannot be found in
this manual, contact the nearest Flowserve Pump Division Representative.
To Next Page
Loading...
